Request a Quote

* = required

• Name*
• Title
• Company Name
• Street Address
• Address 2
• Town/City
• State/Country
• Zip Code/Postal Code
• Phone
• Fax
• Email*

Description of Cut

• Size & Shape: i.e. Square, Hex, Round, Keyway, D-Hole, DD-Hole, Serration, Rectangular, V-notch, Etc.
• Tolerance:

Length of Cut

Type of Material to be Broached

Condition of Hole or Surface before Broaching

• Size & Shape of Pilot Hole
• If hole is cast, give minimum hole size, including draft and fillet radii, if any

For Keyway Broaches give

• Min. Bore Size
• Keyway width
• Tolerance
• Depth of Keyway, measured across Bore

Type of Broaching Machine used

Push Pull

• Tonnage
• Ram Travel
• Daylight Opening:

Number of Pieces to be broached

Comments

In addition, a fully dimensioned drawing of the finished part, casting, forging, or Broach would be most helpful. You may FAX us at (413) 773-8430 or (877) 331-9957. You may also attach to an EMail and send to info@dumont.com.

duMONT Special Broaches can be ordered from your industrial distributor, phone us (413-773-3674 / 877-628-9648) or EMail us at info@dumont.com for the name of the distributor nearest your location.